RESCUE - RECOVERY
LIFTING BAGS - HEAVY LIFTING - RESCUE - VEHICLE RECOVERY

   

HOME
RESCUE- LIFTING BAGS

- 8-BAR LIFT BAGS
- 10-BAR LIFT BAGS
- FLAT-FORM 8-BAR
- FLAT-FORM 10-BAR
- MINI LIFT BAG KIT
- HIGH-LIFT BAGS
- USAR LIFT KIT

- SVLB LIGHT-DUTY
- MAXI-LIFT BAGS

- UNDERWATER

- CUSTOM BAGS
- HYDROTESTING


PIPE PLUGS & PACKERS
LIFT BAG HYDROTEST
HAZMAT CONTROL
UNDERGROUND ENGINEERING
SURFACE WATER MANAGEMENT
OFFSHORE - OIL BOOMS
MILITARY RESCUE
TOWING - RECOVERY
SAVACOMM WIRELESS
INFLATABLE SHELTERS
UNDERWATER LIFTING
REMOTE AREA LIGHTING
TRAINING ACADEMY
AIRCRAFTCOVERY
CONVEYER BELTS
SPORT TIRES
OFFSET PRINTING BLANKETS

CONTACT - LOCATIONS
MANUALS

TRADE SHOWS

SAVA EN ESPAÑOL


8-bar HIGH PRESSURE LIFTING BAGS - METRIC

High Pressure Lifting Bags
Heavy lifting bags are thin profile and simple to use. Surface nodes create an interlocking surface which provides superior gripping power when stacked. Twelve standard sizes are available with lift capacity up to 70 metric tons. Safety straps provide anchorage for attachment of pulling and placement ropes so it is not necessary for personnel to reach under a live, unstable load.

 

HIGH PRESSURE LIFTING BAGS
FLAT-FORM LIFTING BAGS
HIGH-LIFT LIFTING BAGS
MAXI-LIFT RECOVERY LIFTING BAGS
RAPID RESPONSE SHELTERS
ENGINEERED INFLATABLES


SQUARE LIFTING BAGS

High Pressure Lifting Bags

Heavy lifting bags are thin profile and simple to use. The convex surface nodes create an interlocking surface which provides superior gripping power when stacked. Twelve standard sizes are available with lift capacity up to 74 tons. Safety straps minimize shifting hazards and allow bags to be strapped together for safety. Safety straps provide anchorage for attachment of pulling and placement ropes so it is not necessary for personnel to reach under a live, unstable load. Safety straps come standard with all bags 18” or larger.

Custom engineered heavy lifting bags for special purpose applications are also available. Use for heavy load shifting, dunnage, leveling, or padded support up to 74 tons and higher.

 


*Note: Selection of the proper air bag depends on the ratio of height vs. weight. For instance, you wouldn't’t use a 30 ton air bag to lift 30 tons. Max. lift height decreases as the weight increases. Use the graph (RIGHT) to determine the max. height any particular bag will lift a certain weight.

 

RECTANGULAR LIFTING BAGS

Rectangular Lifting Bags

 
8-bar HIGH PRESSURE LIFTING BAGS (SQUARE SHAPE)
PART NUMBER 77973 77974 77975 76734 76735 76736 76737 76738 76739 76794 573241
SIZE cm 15x15 22x22 30x30 38x38 45x45 55x55 61x61 69x69 78x78 87x87 95x95
THICKNESS mm 25 25 25 25 25 25 25 25 25 25 26
*MAX LIFT (SEE GRAPH) cm 8 13 16 21 25 30 34 38 42 47 52
*MAX LOAD (SEE GRAPH) M ton 0.8 2.7 5 10 13 21 25 33 44 55 70
STRAP HANDLES qty NONE NONE NONE NONE NONE 4 ea. 4 ea. 4 ea. 4 ea. 4 ea. 4 ea.
BAG WEIGHT kg 0.55 1.25 2 3.5 5 7 9 11 14 18 22.5
WORKING PRESSURE bar 8 8 8 8 8 8 8 8 8 8 8
TEST PRESSURE bar 12 12 12 12 12 12 12 12 12 12 12
BURST PRESSURE bar 32 32 32 32 32 32 32 32 32 32 32
VOLUME L 5 15 42 86 152 296 508 621 921 1305 1505

8-bar HIGH PRESSURE LIFTING BAGS (RECTANGULAR SHAPE)
PART NUMBER   77983 519833 519834 519837
SIZE cm 32x102 30x45 37x50 37x75
THICKNESS mm 25 25 25 25
*MAX LIFT (SEE GRAPH) cm 20 19 23 23
*MAX LOAD (SEE GRAPH) M ton 24 8.9 13.2 20.2
STRAP HANDLES qty 2 ea. NO NO 2 ea.
BAG WEIGHT kg 7.8 3.3 4.5 6.5
WORKING PRESSURE bar 8 8 8 8
TEST PRESSURE bar 12 12 12 12
BURST PRESSURE bar 32 32 32 32
VOLUME L 220 95 170 220

View SAE specifications

 

LIFTING BAG TRAINING VIDEO

Download Video

Video mwv (160 mb, 8 min download time)

This is a 52 minute, low resolution, preview video.
If you would like the free HD DVD for classroom or projector use, contact us 386-760-0706.
The HD DVD includes training instruction, test materials and training certificate.

 

 

PROTECTIVE PADS

Protective Rubbeized Matt

TBP-C Rubberized Matt
20"x20"x1" rubberized mat protects lifting bags from sharp objects and abrasive wear.


HEAT SHIELD BLANKET

Protective Heat Shield

931060 Small Heat Shield Pad
HP Torch Blanket; HP Black Felt;
24" x 24"x1/8" tough woven silica felt welding mat can continuously withstand temperatures up to 1800°F (982°C).

931061 large Heat Shield Pad
HP Torch Blanket; HP Black Felt;
36" x 36"x1/8" tough woven silica felt welding mat can continuously withstand temperatures up to 1800°F (982°C).

 

 

LOAD PLATES

Load Plates

556309 Load Plate
16" x 16" x 5/8" Rigid rubber coated 1/4" aluminum plate spreads out concentrated loads so lifting bags stay flat (10 Lbs.).

556310 Load Plate
20 " x 20" x 5/8" Rigid rubber coated 1/4" aluminum plate spreads out concentrated loads so lifting bags stay flat (16 Lbs.).

556311 Load Plate
26 " x 26" x 5/8" Rigid rubber coated 1/4" aluminum plate spreads out concentrated loads so lifting bags stay flat (32 Lbs.).

Load plates can be used on uneven ground or when the load is smaller than the bag. Keeps the bag flat preventing lift height loss due to concentrated load depression. Works well when lifting heavy framing members, pipe sections, anything cylindrical or narrow.

 

INFLATION ACCESSORIES

Sava inflation accessories have been designed for precision control, high reliability and long life. Use only Sava controllers for maximum safety and performance.

Industrial quality, sold rubber composite hoses and nickel plated couplers work exceptionally well in all temperatures and weather conditions from the arctic, to the desert, to the tropics.

All Sava controllers come with built-in pressure relief valves.

 
LIFT BAG KITS

Lifting Bag KitsMini Lift Bag Kits

High pressure lift bag and controller kits for rescue vehicles, fire trucks, industrial use or other applications.

 

DOUBLE CONSOLE CONTROLLER

Double Controller

Part# 548275 VARIABLE CONTROL DUAL CONSOLE
Dual Deadman controller is preferred for precise inflation and deflation control. All metal, Sava variable control, deadman, console controllers are the most popular choice for first responders and rescue teams, recovery and vehicle (or structure) stabilization operations. The Deadman controller can accurately control one or two bags from a single regulated air source.

Built-in safety relief valves prevent lifting bag over pressurization. Toggles are pressure sensitive; open a little for slight flow, open more for more flow. Couplers are color coded for use with colored hoses for easier identification during lifting. 

Color Code Standard Colors:
Yellow = Supply hose
Blue = Primary inflation distribution hose (for single controllers)
Red = Secondary inflation distribution hose (for dual controllers)
Green = Third inflation distribution hose (for triple controllers)

Black = additional hose for other applications (MSHA approved for mine use).

 

TRIPLE CONSOLE CONTROLLER
Triple Console Controller

Part# 548276 VARIABLE CONTROL TRIPLE CONSOLE
Triple Deadman controller is preferred for precise inflation and deflation control. All metal, Sava variable control, deadman, console controllers are the most popular choice for first responders and rescue teams, recovery and vehicle (or structure) stabilization operations. The Deadman controller can accurately control one, two or three bags from a single regulated air source.

Built-in safety relief valves prevent lifting bag over pressurization. Toggles are pressure sensitive; open a little for slight flow, open more for more flow. Couplers are color coded for use with colored hoses for easier identification during lifting. 

Color Code Standard Colors:
Yellow = Supply hose
Blue = Primary inflation distribution hose (for single controllers)
Red = Secondary inflation distribution hose (for dual controllers)
Green = Third inflation distribution hose (for triple controllers)

Black = additional hose for other applications (MSHA approved for mine use).

 

WATERPROOF DOUBLE CONSOLE CONTROLLER

Console Controller in CaseCase

Part # 568777 ASSM-8bar

Sava Waterproof Console Type Variable Deadman Controller:
Control two bags from one air source. Variable inflation/deflation toggles control each bag independently. When closed, controller is waterproof. Case has purge valve for high altitude use or airplane flight. 116 PSI (8-bar) working pressure.

 

WATERPROOF TRIPLE CONSOLE CONTROLLER

Case

Part # 581621 ASSM-8bar

Sava Waterproof Console Type Variable Deadman Controller:
Control three bags from one air source. Variable inflation/deflation toggles control each bag independently. When closed, controller is waterproof. Case has purge valve for high altitude use or airplane flight. 116 PSI (8-bar) working pressure.

 

COMPRESSOR ADAPTERS

Sava lifting bag accessories are designed primarily to connect to Sava high pressure cylinder regulators. For industrial use an additional adapter may be needed to be able to plug Sava air hose safety couplers to your system.

Commercial Compressor Adapter
PCA-1 Industrial Interchange compressor adapter

Construction Compressor Adapter
TCA-1 Chicago Claw compressor adapter

Air Brake Adapter
GCA-1 Glad-Hands Air brake adapter

 

INFLATION HOSE
HosesNytril
3/8”ID *Nytrile all-weather inflation hoses.
*Black hose is Neoprene and approved for use in mines (MSHA approved).
Choice of Black, Blue, Green, Yellow, or Red.
Select colors according to standard controller color coding.
Rubber hoses remain flexible from -40°F to +212°F (-40°C to 100°C).
Nytrile rubber is naturally resistant to oil & fuel.
All hoses come with proprietary safety couplers which are compatible with Sava air bags, controllers and associated accessories.
Use adapters to convert air compressor, truck air, or other air source to Sava safety couplers.
Burst pressure, 1,000 PSI.

STANDARD HOSE WITH SAFETY COUPLERS
PART
COLOR
IDxOD
LENGTH
COUPLER
RELIEF
RUBBER
APPLICATION
77682SC20
YELLOW
3/8"x5/8"
20'
Safety
NONE
Nytrile
SUPPLY HOSE
77679SC20
BLUE
3/8"x5/8"
20'
Safety
NONE
Nytrile
PRIMARY DISTRIBUTION
76683SC20
RED
3/8"x5/8"
20'
Safety
NONE
Nytrile
SECONDARY DISTRIBUTION
77680SC20
GREEN
3/8"x5/8"
20'
Safety
NONE
Nytrile
THIRD DISTRIBUTION
77678SC20
BLACK
3/8"x5/8"
20'
Safety
NONE
Neoprene
FOURTH DISTRIBUTION
77682SC35
YELLOW
3/8"x5/8"
35'
Safety
NONE
Nytrile
SUPPLY HOSE
77679SC35
BLUE
3/8"x5/8"
35'
Safety
NONE
Nytrile
PRIMARY DISTRIBUTION
76683SC35
RED
3/8"x5/8"
35'
Safety
NONE
Nytrile
SECONDARY DISTRIBUTION
77680SC35
GREEN
3/8"x5/8"
35'
Safety
NONE
Nytrile
THIRD DISTRIBUTION
77678SC35
BLACK
3/8"x5/8"
35'
Safety
NONE
Neoprene
FOURTH DISTRIBUTION
HOSE WITH SHUT-OFF VALVE AND RELIEF VALVE
77679SCV20
BLUE
3/8"x5/8"
20'
Safety
*YES
Nytrile
PRIMARY DISTRIBUTION
76683SCV20
RED
3/8"x5/8"
20'
Safety
*YES
Nytrile
SECONDARY DISTRIBUTION
77680SCV20
GREEN
3/8"x5/8"
20'
Safety
*YES
Nytrile
THIRD DISTRIBUTION
77678SCV20
BLACK
3/8"x5/8"
20'
Safety
*YES
Neoprene
FOURTH DISTRIBUTION
77679SCV35
BLUE
3/8"x5/8"
35'
Safety
*YES
Nytrile
PRIMARY DISTRIBUTION
76683SCV35
RED
3/8"x5/8"
35'
Safety
*YES
Nytrile
SECONDARY DISTRIBUTION
77680SCV35
GREEN
3/8"x5/8"
35'
Safety
*YES
Nytrile
THIRD DISTRIBUTION
77678SCV35
BLACK
3/8"/5/8"
35'
Safety
*YES
Neoprene
FOURTH DISTRIBUTION

*Hose with safety couplers, inline shut-off valve and safety relief valve.
Normally the yellow supply hose would not need a relief valve or shut-off valve.
Shut-off relief valve

 

 

INLINE SAFETY DEVICES
Inline shut-off and relief valves are removable and can be installed on either end of the hose or left on the lift bag.

Inline shut-off Valve
DVLB-1SC, INLINE SHUT-OFF

Inline shut-off with Relief Valve

60844EULRV, INLINE SHUT-OFF WITH OVER-PRESSURE RELIEF VALVE

 

Hand-Held Single ControllerHand-Held Double Controller

539060, SINGLE CONTROLLER
539061, DOUBLE CONTROLLER
Hand-Held Single and Double controllers are very solid and work well in environments where one handed operation is preferred. Inflation buttons feature full on-off or deflate position. Overpressure safety relief valves built-in with separate gauges for each bag to operate independently but with one air supply source. Controllers will operate with compressor, SCBA breathing air source or even truck brake air source. Machined aluminum body is rugged and lightweight. Rubber handle with surface nodes work will in cold temperatures, hot temperatures and has a positive grip when wet or icy.
(Not for use with triple bag set)

 

76681, Single Fitting Controller
76682, Double Fitting Controller
Excellent choice for use when extreme environmental conditions require a simplified controller.
(Not for use with triple bag set)

 
REGULATORS
For use with high pressure SCBA cylinders.

Regulators
72128-CGA-8 bar, Single-stage Piston Regulator (CGA) for long life and precision control from 0-116 psi. Fits all CGA346 and CGA347 cylinders. Input up to 6,000 psi
72128-CGA-10 bar, Single-stage Piston Regulator (CGA) for long life and precision control from 0-145 psi. Fits all CGA346 and CGA347 cylinders. Input up to 6,000 psi
72128-1 Single-stage Diaphragm Regulator (CGA) economical control from 0-116 psi. Fits CGA347 DOT cylinders.
72128-0 Single-stage Diaphragm Regulator (CGA) economical control from 0-116 psi. Fits CGA346 DOT cylinders.
72128 Single-stage Diaphragm regulator (DIN) for international DIN type cylinders. 0-8 bar. Fits DIN only, not for USA DOT cylinders.

 

MANUAL 116 PSI FOOT PUMP

Foot Pump

544567 Foot pump with gauge, pressure relief, and deflation valve.

 
TESTING ACCESSORIES

EL-1F, HYDROSTATIC TEST PUMP
For testing inflatable products. Periodical testing with water under high pressure measures performance and can safely reveal damage or wear before an explosive failure can occur with air pressure.

Pump includes four (5ft.) hoses and connectors to test Sava bags and adapters to test most other lifting bags.

Documentation and forms are supplied for creating a comprehensive program to track and record each bag tested throughout its history from purchase to equipment retirement.




SAVATECH CORP - PORT ORANGE FLORIDA - 386-760-0706 - 888-436-9778

Credit Cards Accepted